Properties of diamondlike films obtained in a barrier discharge at...
AbstractDiamondlike films are synthesized from gaseous hydrocarbons in a barrier discharge at atmospheric pressure. The films were investigated using transmission electron microscopy, electron...
View ArticlePlasma-Chemical Conversion of Lower Alkanes with Stimulated Condensation of...
AbstractOxidative conversion of a mixture of natural gas and oxygen in a barrier-discharge plasma-chemical reaction was investigated experimentally. The process was conducted at atmospheric pressure...
View ArticleMethod for pulsed magnetron deposition of diamondlike films on large-area...
AbstractThe circuit of the pulse power supply of a magnetron sputtering system and the circuit of a high voltage generator used to realize the process of pulsed magnetron deposition of diamondlike...
View ArticleEvolution of nonequilibrium aerosol parameters in crown-streamer discharge...
AbstractNonstationary parameters of an aerosol formed from unsaturated vapors of styrene and n-hexane in a pulsed crown-streamer discharge in air or argon at atmospheric pressure have been studied. In...
View ArticlePulsed electrodynamic separation of small conducting particles
AbstractThe possibility of the electrodynamic acceleration of small conducting particles in a pulsed magnetic field generated by induction coils is theoretically justified. It is shown that, at a...
View ArticleImpulse electrodynamic separation of small conducting particles
AbstractThe paper presents the theoretical justification and experimental validation for separation of small conducting nonmagnetic particles in the pulsed travelling magnetic field. The method...
View ArticleInvestigation of plasma characteristics in an unbalanced magnetron sputtering...
AbstractResults are presented from experimental studies of a magnetron sputtering system for different configurations of the magnetic field above the cathode surface. The current-voltage...
View ArticleSolid nanocrystalline fullerite-containing carbon coatings
AbstractSolid carbon coatings with a high content of nanocrystalline fullerite have been obtained using unbalanced magnetron sputtering of graphite under conditions of pulsed high-voltage ion...
View ArticleEffect of residual internal stresses in tin coatings on specific losses in...
AbstractMethods of X-ray diffraction analysis, mass-spectrometry, and atomic force microscopy have been used to perform a comparative analysis of factors that cause the appearance of residual stresses...
View ArticleGallium-doped zinc oxide films deposited using an unbalanced magnetron...
AbstractGallium-doped zinc oxide films are deposited using an unbalanced magnetron sputtering system. The films are deposited by dc sputtering of a conducting ceramic target in an argon atmosphere. The...
View ArticleProperties of multilayer ZnO:Ga/Ag/ZnO:Ga coatings applied by magnetron...
AbstractThe methods of van der Pau, spectrometry, and atomic force microscopy were used to study the optical and electrophysical properties of multilayer ZnO:Ga/Ag/ZnO:Ga coatings applied by magnetron...
View ArticleStudy of the plasma parameters in a high-current pulsed magnetron sputtering...
AbstractResults are presented from experimental studies of the current-voltage characteristics and spatial and temporal parameters of the plasma in a high-current pulsed magnetron sputtering system...
View ArticleMid-temperature solid oxide fuel cells with thin film ZrO 2 : Y 2 O 3...
AbstractData on the mid-temperature solid-oxide fuel cells (SOFC) with thin-film ZrO2-Y2O3 (YSZ) electrolyte are shown. Such a fuel cell comprises a carrying Ni-YSZ anode, a YSZ electrolyte 3–5 μm...
View ArticleOptical studies of plasma inhomogeneities in a high-current pulsed magnetron...
AbstractResults are presented for experimental studies of the plasma glow in a high-current pulsed magnetron discharge by using a high-speed optical frame camera. It is found that the discharge plasma...
View ArticleVoluminous high-density plasma generator based on high-current pulsed...
Results of investigations into the spatial and temporal parameters of the voluminous plasma generated by two high-current pulsed magnetron sputtering systems operating in balanced and unbalanced...
View ArticleProperties of low-emission coatings based on Ag and Cu deposited on polymer...
AbstractResults of experiments on the deposition of multilayer low-emission coatings with “oxide-metaloxide” structure on polyethylene terephthalate film by magnetron sputtering are presented. The...
View ArticleA power supply for magnetron sputtering systems
AbstractA design and electric circuits of the power supply for magnetron sputtering systems with a power of up to 5 kW are described. The power supply is intended for operation in direct-current (DC)...
View ArticleSynthesis and investigation of porous Ni-Al substrates for solid-oxide fuel...
AbstractSelf-propagating high-temperature synthesis (SHS) is applied for the production of porous supporting Ni-Al bases of solid-oxide fuel cells. The effect of synthesis conditions and the...
View ArticleMagnetron formation of Ni/YSZ anodes of solid oxide fuel cells
AbstractPhysico-chemical and structural properties of nanocomposite NiO/ZrO2:Y2O3 (NiO/YSZ) films applied using the reactive magnetron deposition technique are studied for application as anodes of...
View ArticleA modular bipolar power supply for high-power ion-plasma installations
AbstractThe circuitry solutions, design, and main parameters of a modular pulse bipolar power-supply unit for high-power ion-plasma facilities are described. The modular principle of designing power...
View Article
